As far as printers go it seems like a really good one so far. I have been doing a lot of decluttering recently and managed to free up a cupboard which has power in it and love the fact I can keep it in the cupboard and print to it through wifi! This printer is not zero waste as it came packaged in plastic and the ink to fill up the tank was provided in disposable plastic containers which were again wrapped in plastic. The benefit of these over other cartridges though are that less of them are needed and there is less ongoing waste with this printer. Also as the ink can be refilled, although it is an expensive initial outlay, it is likely to work out cheaper in the long run than using a printer which won’t allow cartridges to be refilled.

Putting the ink into the machine was quite simple. Working out how to get it to work with my computer was a little complicated but once we got it all set up it has been easy to use. I particularly like being able to scan things in like my kids artwork, so that I can then put the originals in the recycling or use it to wrap gifts without feeling too guilty :).  As much I would like to reduce my printing there are times when I need to print and it came in really useful for printing out pictures for one of my kids homework recently.

You can adjust how quickly the printer goes onto standby with the eco setting and it is worth changing it so that it isn’t on fully for too long (or even better turn it off when you aren’t using it). It isn’t going to cost big bucks either way though. We plugged it into a plug-in energy monitor and worked out that if it was left on all year (without printing) it would cost us around £6 a year in electricity costs and if it was on standby (again without printing) it would cost us only about £2 for the year!

There is a range of these printers to suit different needs, which you can find out more about on the Epson site.

UPDATE: I have found that I have struggled to keep the printer connected to my laptop via WIFI, I don’t know if this is something to do with my home network, laptop or the printer though.

Disclaimer: a printer was received for review and affiliate links have been used in this article, but the opinions were my own!

I currently do my food shopping every week with Abel and Cole (an online organic fruit and veg box site), one of their listed retailers. So now when I do my shopping if I take a quick visit to Bonsum first I can gain a few bonets each time. Other retailers include, Green and Blacks, Planet Organic, Etsy, Toms, Traidcraft, Green People and more!

Bonsum has a set of five criteria that they judge each of their retailers on and they make sure that at least two of them are met by each retailer. These criteria include whether or not the item is fair trade, animal friendly, is made from sustainable, recycled or recyclable materials, contains safe ingredients and is CO2 neutral. I like the page they have written about each shop and exactly how they feel they have met these criteria. They detail the good stuff the retailers are doing as well as acknowledging where the retailers aren’t perfect.

I think it would take quite a while before the Bonets added up to much, but after the initial registration it only takes seconds to click through to your chosen site. It is quite nice to collect a few points either for charity each time I shop or if I manage to save up enough I might even splurge on a jar of coconut oil!

If you decide to sign up, use the code helloecothriftyliving and you will find yourself with 200 Bonets to get you started!

Disclaimer – This is a sponsored post.

We have solar panels and like many people want to make the most of the electricity they produce. There are products that can redirect any excess electricity generated to your hot water tank but they are of no use to us as we have a combi boiler and don’t have a tank. We use as much electricity as we can when the sun is shining – we put the washing and dishwasher on during the day, but still on sunny days we export most of it back to the grid.

 

Immersun is a diverter product and when they got in touch to ask if we wanted to trial their product my initial thoughts were it was of no use to us, but a couple of people on the Microgen forum where I share my solar usage data were using the diverter products for heating via another means, so I thought it was worth investigating.

 

So how does it work, well the Immersun measures the amount of electricity we are importing or exporting from the grid and if we are exporting diverts the same amount of electricity to a heating element. It checks this every few seconds so if we turn the kettle on or the sun goes behind a cloud it recognises it very quickly. Now the clever bit is that if you are directing the electricity to a heater it takes whatever electricity is available and gives it back as heat. 

 

We had the Immersun installed by a very nice electrician. He turned up and asked where our hot water tank was, I explained that I wanted it to be used for plugging in a heater and that I wanted to be able to take it into different rooms as needed. After the initial surprise he said he could mount it onto a piece of wood with a couple of standard plugs on it and we can plug any resistive load onto them, eg. heaters or lights.

 

We got the wireless adapter for the Immersun which meant that the main unit could be wired to a plug and therefore could be plugged in anywhere in the house and provide 2 (or even 3) plugs for use.

 

We bought a 2kw convection heater and its now sitting in our hallway heating the core of the house. To be honest at the minute it’s over heating the house a bit as the outside temperature hasn’t been low enough and the sun has been shining quite a lot. I’ve even plugged my kettle into the plug and had a cup of solar powered tea from it. It took a few minutes to boil but hey.

 

This system will not be of any use in the middle of summer and may not have a huge amount of use in the middle of winter. In Autumn and Spring though this has the potential to save us money on our gas bill and keep Mrs EcoThrifty warm on a cold day, as she spends most of her time in the house.

 

If you are buying this setup it will cost you £400 – £500 (see here) plus installation depending on if you get the remote monitoring which isn’t essential but nice to have. The heater cost us £20 so it would take a while to pay for itself. The Immersun allows you to put in your electricity costs and it will tell you how much in Kwh and £/$ have been saved but the real saving for me will be how much less gas we use and how warm the house feels on a cold spring or autumn day.  So watch this space for the next blog post to see how we get on with it as the trial progresses. For more information about the Immersun, take a look at their website here.

 

This was a guest post from Mr ETL.

 

If you liked this post please click like on Facebook and follow on Twitter – thanks so much!

Disclaimer – there are affilate links in this blog post.